HUPLONG INDUSTRIES (M) SDN BHD
No 2-48, Jalan Perniagaan 2, Taman Pusat Perniagaan, Kampung Tengah Sungai Abong, 84000 Muar, Johor, Malaysia.
+606-9522968
24B, Jalan PSK 3,
Pusat Perdagangan Seri
Kembangan, 43300
Seri Kembangan,
Selangor, Malaysia.
+6016-3411889
NORRES CP VITON® 459 EC 每 Electrically Conductive Clamp Profile Hose up to +210∼C
| Previous | 2 / 27 | Next |
- NORRES CP VITON 459 EC Malaysia
- VITON Coated Polyester Fabric Hose
- Electrically Conductive Clip Hose
- Chemical Vapour Extraction Hose
- High Temperature Gas and Dust Hose
Product details
- chemical industry: chemical vapours, vapour return hose at loading arm, paint steam, spray mist extraction
- flexible hose/ ducting for hot and cold gases and for dust, powder, fibres
- explosion hazard area
- bellows, compensators
PROPERTIES
- abrasion protection via external clamp profile
- secure clamping of the wall within the clamp profile
- highly flexible + compressible 4:1
- very good heat resistance
- good resistance to oil, gasoline and chemicals
- good resistance to alkalis and acids
- electrically conductive wall: electrical and surface resistance <10⁴Ω (according to NFPA 652 <10⁶Ω)
- in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: aspiration of combustible dusts (Zone 22 inside), for use in zone 1 and 2 (gases), for use in Zone 0 (gases)
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
TEMPERATURE RANGE
- -20°C to 210°C
DESIGN
- CP construction
- 1. clamp profile supporting spiral: galvanised steel
- VITON® is a registered trademark of DuPont.
DELIVERY VARIANTS
- further diameters and lengths available on request
HUPLONG INDUSTRIES (M) SDN BHD is the authorized distributor of NORRES industrial hoses in Malaysia.
HUPLONG INDUSTRIES (M) SDN BHD supplies genuine NORRES CP VITON® 459 EC hose for flexible ducting and extraction of hot and cold gases, dust, powder and fibres. NORRES also lists this model for chemical vapours, vapour return hose applications at loading arms, paint steam extraction and spray mist extraction.
NORRES CP VITON® 459 EC is an electrically conductive clamp profile hose, also known as a clip hose. Its official construction includes a galvanised steel clamp profile supporting spiral and a VITON® coated polyester fabric wall. The external clamp profile provides abrasion protection and secures the hose wall within the clamp profile.
This hose is highly flexible and compressible at a ratio of 4:1. NORRES specifies very good heat resistance, good resistance to oil, gasoline and chemicals, as well as good resistance to alkalis and acids. The official temperature range is from -20°C to +210°C.
NORRES officially lists CP VITON® 459 EC for chemical industry applications, extraction of paint steam and spray mist, flexible ducting for gases and particulate materials, explosion hazard area applications, bellows and compensators.
NORRES states that the hose wall is electrically conductive, with electrical and surface resistance below 10⁴ Ω. The official product information also states that it is in accordance with ATEX 2014/34/EU and German TRGS 727 for aspiration of combustible dusts in Zone 22 inside the hose, use in Zone 1 and Zone 2 for gases, and use in Zone 0 for gases. The complete system design, earthing arrangement and installation requirements must be checked before selection.
The permitted pressure, vacuum and bending radius values vary by hose size and must be checked against the official technical table before use.
Our team can assist customers throughout Malaysia with NORRES hose selection based on hose diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length and quantity requirement.
FAQ
Q: What is NORRES CP VITON® 459 EC?
A: NORRES CP VITON® 459 EC is an electrically conductive clamp profile hose, also called a clip hose, for hot and cold gases, dust, powder and fibres. NORRES lists an official temperature range of -20°C to +210°C.
Q: What is the official construction of CP VITON® 459 EC?
A: The hose has a CP construction with a galvanised steel clamp profile supporting spiral and a VITON® coated polyester fabric wall.
Q: Is CP VITON® 459 EC electrically conductive?
A: Yes. NORRES specifies an electrically conductive wall with electrical and surface resistance below 10⁴ Ω. NORRES also references a value below 10⁶ Ω according to NFPA 652.
Q: What applications are officially listed by NORRES?
A: NORRES lists chemical vapours, vapour return hose applications at loading arms, paint steam extraction, spray mist extraction, flexible ducting for hot and cold gases, dust, powder, fibres, bellows and compensators.
Q: Does this hose have chemical resistance?
A: NORRES states that CP VITON® 459 EC has good resistance to oil, gasoline and chemicals, as well as good resistance to alkalis and acids. Compatibility must still be checked against the actual conveyed medium and operating conditions before use.
Q: Is CP VITON® 459 EC suitable for explosion hazard area applications?
A: NORRES states that the hose is in accordance with ATEX 2014/34/EU and German TRGS 727 for aspiration of combustible dusts in Zone 22 inside the hose, use in Zone 1 and Zone 2 for gases, and use in Zone 0 for gases. This does not replace verification of the complete installed system.
Q: Is this hose flexible?
A: Yes. NORRES officially describes CP VITON® 459 EC as highly flexible and compressible at a ratio of 4:1.
Q: How should the correct hose size be selected?
A: Selection should consider hose inside diameter, outside diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length, bending radius and required quantity. The permitted pressure, vacuum and bending radius values vary by hose size and must be checked against the official technical table before use.