HUPLONG INDUSTRIES (M) SDN BHD
No 2-48, Jalan Perniagaan 2, Taman Pusat Perniagaan, Kampung Tengah Sungai Abong, 84000 Muar, Johor, Malaysia.
+606-9522968
24B, Jalan PSK 3,
Pusat Perdagangan Seri
Kembangan, 43300
Seri Kembangan,
Selangor, Malaysia.
+6016-3411889
NORRES CP PTFE/HYP-INOX 472 每 Clamp profile hose (clip hose), double-layer (up to +170∼C)
| Previous | 19 / 27 | Next |
- Chemical Vapour Extraction Hose
- NORRES CP PTFE HYP INOX 472 Malaysia
- Double Layer PTFE Clip Hose
- CSM Coated Polyester Fabric Hose
- Hot Gas Dust Extraction Hose
Product details
- flexible hose/ ducting for hot and cold gases and for dust, powder, fibres
- chemical industry: chemical vapours, vapour return hose at loading arm, paint steam, spray mist extraction
PROPERTIES
- abrasion protection via external clamp profile
- secure clamping of the wall within the clamp profile
- highly flexible + compressible 4:1
- very good heat resistance
- anti-adhesive
- good resistance to alkalis and acids
- extremely good resistance to chemicals
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
TEMPERATURE RANGE
- -40°C to 170°C
DESIGN
- CP construction
- 1. clamp profile supporting spiral: all-stainless steel (INOX)
- TEFLON® is a registered trademark of DuPont.
DELIVERY VARIANTS
- further diameters and lengths available on request
HUPLONG INDUSTRIES (M) SDN BHD is the authorized distributor of NORRES industrial hoses in Malaysia.
HUPLONG INDUSTRIES (M) SDN BHD supplies genuine NORRES CP PTFE/HYP-INOX 472 hose for flexible ducting of hot and cold gases, as well as dust, powder and fibres. NORRES also officially lists this model for chemical vapours, vapour return hose applications at loading arms, paint steam extraction and spray mist extraction.
NORRES CP PTFE/HYP-INOX 472 is a double-layer clamp profile hose, also known as a clip hose. Its official construction includes an all-stainless steel INOX clamp profile supporting spiral, a PTFE film interior and a CSM coated polyester fabric exterior.
The external clamp profile provides abrasion protection and securely clamps the hose wall within the profile. NORRES specifies that the hose is highly flexible and compressible at a ratio of 4:1, with very good heat resistance and anti-adhesive properties. The official product information also states good resistance to alkalis and acids, as well as extremely good resistance to chemicals.
NORRES specifies an operating temperature range from -40°C to +170°C. The permitted pressure, vacuum and bending radius values vary by hose size and must be checked against the official technical table before use.
Our team can assist customers throughout Malaysia with NORRES hose selection based on hose diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length and quantity requirement.
FAQ
Q: What is NORRES CP PTFE/HYP-INOX 472?
A: NORRES CP PTFE/HYP-INOX 472 is a double-layer clamp profile hose, also called a clip hose, for flexible ducting of hot and cold gases, dust, powder and fibres.
Q: What is the official construction of CP PTFE/HYP-INOX 472?
A: The hose has an all-stainless steel INOX clamp profile supporting spiral, a PTFE film interior and a CSM coated polyester fabric exterior.
Q: What applications are officially listed by NORRES?
A: NORRES lists flexible ducting for hot and cold gases, dust, powder and fibres. Listed chemical-industry applications include chemical vapours, vapour return hose at loading arms, paint steam extraction and spray mist extraction.
Q: What is the operating temperature range?
A: NORRES specifies an operating temperature range from -40°C to +170°C.
Q: Does CP PTFE/HYP-INOX 472 have chemical resistance?
A: NORRES specifies extremely good resistance to chemicals, as well as good resistance to alkalis and acids. Compatibility with the actual conveyed medium, concentration, temperature and operating conditions must be checked before use.
Q: Is this hose flexible?
A: Yes. NORRES describes CP PTFE/HYP-INOX 472 as highly flexible and compressible at a ratio of 4:1.
Q: Can CP PTFE/HYP-INOX 472 be used for suction and pressure applications?
A: The official technical table lists pressure and vacuum values for the available hose sizes. The permitted values vary by hose size and must be checked against the official technical table before use.
Q: How should the correct hose size be selected?
A: Selection should consider hose inside diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length, bending radius and quantity requirement. The permitted pressure, vacuum and bending radius values vary by hose size and must be checked against the official technical table before use.