HUPLONG INDUSTRIES (M) SDN BHD
No 2-48, Jalan Perniagaan 2, Taman Pusat Perniagaan, Kampung Tengah Sungai Abong, 84000 Muar, Johor, Malaysia.
+606-9522968
24B, Jalan PSK 3,
Pusat Perdagangan Seri
Kembangan, 43300
Seri Kembangan,
Selangor, Malaysia.
+6016-3411889
NORRES CP HiTex 485 每 Multi-Layer Insulating Clamp Profile Hose up to +550∼C
| Previous | 11 / 27 | Next |
- High Temperature Clamp Profile Hose
- NORRES CP HiTex 485 Malaysia
- Multi Layer Insulating High Temperature Hose
- Vehicle Exhaust Gas Extraction Hose
- Engine Test Bench Exhaust Measurement Hose
Product details
- flexible hose/ ducting for hot and cold gases
- vehicle gas exhaust system, car gas extraction: hose reel, slotted floor channel, underfloor extraction system
- engine test bench, exhaust gas measurement
- high temperature extraction: oven, foundry, furnace, smelting, ceramics industry, glass industry, steel plant, aluminium mill
- bellows, compensators
PROPERTIES
- secure clamping of the wall within the clamp profile
- highly flexible + compressible
- insulating
- suitable for light overpressure
- very good heat resistance
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
TEMPERATURE RANGE
- -60°C to 500°C
- short time to 550°C
DESIGN
- CP construction
- 1. clamp profile supporting spiral: galvanised steel
- 2. multi-layer hose wall; wall: interior and exterior special coated glass fabric
DELIVERY VARIANTS
- further diameters and lengths available on request
- stainless steel (INOX) clamp profile
HUPLONG INDUSTRIES (M) SDN BHD is the authorized distributor of NORRES industrial hoses in Malaysia.
HUPLONG INDUSTRIES (M) SDN BHD supplies genuine NORRES CP HiTex 485 multi-layer insulating clamp profile hoses for flexible ducting of hot and cold gases.
NORRES CP HiTex 485 is a high-temperature clamp profile hose, also described by NORRES as a clip hose. NORRES specifies this model as multi-layer, insulating and suitable for slight overpressure.
The official NORRES design is a CP construction with a galvanised steel clamp profile supporting spiral and a multi-layer hose wall. The wall consists of interior and exterior special coated glass fabric.
NORRES lists CP HiTex 485 for flexible hose and ducting of hot and cold gases, vehicle gas exhaust systems, car gas extraction systems, engine test benches, exhaust gas measurement, high-temperature extraction and bellows or compensators.
Official high-temperature extraction applications include ovens, foundries, furnaces, smelting operations, ceramics industry, glass industry, steel plants and aluminium mills.
NORRES states that CP HiTex 485 provides secure clamping of the wall within the clamp profile, is highly flexible and compressible, insulating, suitable for slight overpressure and has very good heat resistance.
The official temperature range is -60°C to 500°C, with short-time operation up to 550°C. NORRES states that CP HiTex 485 conforms to the RoHS guideline.
NORRES lists further diameters and lengths on request. A stainless steel INOX clamp profile delivery variant is also listed by NORRES.
Our team can assist customers throughout Malaysia with NORRES hose selection based on hose diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length and quantity requirement.
The permitted vacuum and bending-radius values vary by hose size and must be checked against the official technical table before use.
FAQ
Q: What is NORRES CP HiTex 485?
A: NORRES CP HiTex 485 is a high-temperature clamp profile hose, also described as a clip hose. NORRES specifies it as multi-layer, insulating and suitable for slight overpressure.
Q: What is the official temperature range of CP HiTex 485?
A: NORRES lists an operating temperature range of -60°C to 500°C, with short-time operation up to 550°C.
Q: What is the official construction of CP HiTex 485?
A: NORRES specifies a CP construction with a galvanised steel clamp profile supporting spiral and a multi-layer hose wall made from interior and exterior special coated glass fabric.
Q: Is CP HiTex 485 an insulating hose?
A: Yes. NORRES identifies CP HiTex 485 as insulating.
Q: Is CP HiTex 485 suitable for slight overpressure?
A: Yes. NORRES states that CP HiTex 485 is suitable for slight overpressure. The actual application conditions must be checked against the official technical table before use.
Q: Can CP HiTex 485 be used for vehicle exhaust extraction?
A: Yes. NORRES lists vehicle gas exhaust systems and car gas extraction applications including hose reels, slotted floor channels and underfloor extraction systems.
Q: Can this hose be used for engine test benches?
A: Yes. NORRES lists engine test benches and exhaust gas measurement among the official applications.
Q: What high-temperature extraction applications are officially listed?
A: NORRES lists ovens, foundries, furnaces, smelting operations, ceramics industry, glass industry, steel plants and aluminium mills.
Q: Is CP HiTex 485 flexible for installation?
A: Yes. NORRES states that CP HiTex 485 is highly flexible and compressible.
Q: Does CP HiTex 485 conform to the RoHS guideline?
A: Yes. NORRES states that CP HiTex 485 conforms to the RoHS guideline.
Q: Are stainless steel clamp profile variants available?
A: NORRES lists a stainless steel INOX clamp profile delivery variant. The required variant must be confirmed according to the application requirement.
Q: How should the correct CP HiTex 485 size be selected?
A: Selection should be based on hose inside diameter, gas temperature, airflow, required vacuum performance, bending radius, installation length and quantity requirement. The permitted vacuum and bending-radius values vary by hose size and must be checked against the official technical table before use.