HUPLONG INDUSTRIES (M) SDN BHD
No 2-48, Jalan Perniagaan 2, Taman Pusat Perniagaan, Kampung Tengah Sungai Abong, 84000 Muar, Johor, Malaysia.
+606-9522968
24B, Jalan PSK 3,
Pusat Perdagangan Seri
Kembangan, 43300
Seri Kembangan,
Selangor, Malaysia.
+6016-3411889
ORRES AIRDUC® TPE 363 (MD) 每 TPE hose, medium-heavy (up to +150∼C)
| Previous | 27 / 27 | Next |
- NORRES AIRDUC TPE 363 MD Malaysia
- Medium Heavy TPE Hose
- Plastic Dryer Hose
- Hot Air Dryer Hose
- Gas Powder Granulate Ducting Hose
Product details
- flexible hose/ ducting for hot and cold gases and for powder, bulk material, granulate
- granulate/ plastic dryer, hot air dryer
- film blowing machine, cooling air at the extrusion tool
- textile industry, steam soaking: steam iron, industrial ironing machine, smoothing iron
- air supply: UV dryer, IR dryer
- bus, utility vehicle, caravan/ trailer, mobile home/ camper/ RV, boat, ship/ vessel/ marine, yacht: ventilation, heating
- compressor, side channel blower, vacuum pump, pressure pump, pump
- paper mill, paper and pulp industry: waste water, air extraction
- heating system/ heater: fresh air supply
PROPERTIES
- medium-heavy duty
- very good heat resistance
- good resistance to oil, gasoline and chemicals
- good resistance to alkalis and acids
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
TEMPERATURE RANGE
- -40°C to 125°C
- short time to 150°C
DESIGN
- AIRDUC® profile hose
- 1. spring steel wire firmly embedded in wall
- 2. Wall: thermoplastic rubber (TPE) (US version: antistatic thermoplastic rubber)
- 3. wall thickness 0,8 mm approx.
DELIVERY VARIANTS
- further diameters and lengths available on request
- black (standard)
- special colours: full coloured
- customer-specific branding
HUPLONG INDUSTRIES (M) SDN BHD is the authorized distributor of NORRES industrial hoses in Malaysia.
HUPLONG INDUSTRIES (M) SDN BHD supplies genuine NORRES AIRDUC® TPE 363 (MD) hose for flexible ducting of hot and cold gases and for powder, bulk material and granulate. NORRES officially lists this TPE hose for plastic processing, air supply, ventilation, heating and selected pump-related applications.
NORRES AIRDUC® TPE 363 (MD) is a medium-heavy AIRDUC® profile hose. Its official construction includes a spring steel wire firmly embedded in the wall and a thermoplastic rubber TPE wall with an approximate wall thickness of 0.8 mm.
NORRES specifies very good heat resistance, good resistance to oil, gasoline and chemicals, as well as good resistance to alkalis and acids. The official temperature range is from -40°C to +125°C, with short-time temperature resistance up to +150°C.
Official NORRES applications include granulate and plastic dryers, hot air dryers, film blowing machines with cooling air at the extrusion tool, textile steam soaking equipment, UV dryers, IR dryers, vehicle and marine ventilation or heating, compressors, side channel blowers, vacuum pumps, pressure pumps, paper and pulp industry waste water and air extraction, and heating-system fresh air supply.
The permitted pressure, vacuum and bending radius values vary by hose size and must be checked against the official technical table before use.
Our team can assist customers throughout Malaysia with NORRES hose selection based on hose diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length and quantity requirement.
FAQ
Q: What is NORRES AIRDUC® TPE 363 (MD)?
A: NORRES AIRDUC® TPE 363 (MD) is a medium-heavy TPE profile hose for flexible ducting of hot and cold gases and for powder, bulk material and granulate.
Q: What is the official construction of AIRDUC® TPE 363 (MD)?
A: The hose has an AIRDUC® profile construction with a spring steel wire firmly embedded in the wall and a thermoplastic rubber TPE wall with an approximate wall thickness of 0.8 mm.
Q: What is the operating temperature range?
A: NORRES specifies a temperature range from -40°C to +125°C. The hose can withstand temperatures up to +150°C for short periods.
Q: What applications are officially listed by NORRES?
A: NORRES lists plastic dryers, hot air dryers, film blowing machines, cooling air at extrusion tools, textile steam soaking equipment, UV dryers, IR dryers, ventilation and heating systems, pumps, paper and pulp industry extraction, and fresh air supply for heating systems.
Q: Can this hose be used for powder bulk material and granulate?
A: Yes. NORRES officially lists AIRDUC® TPE 363 (MD) for powder, bulk material and granulate, subject to checking the actual conveyed material and operating conditions.
Q: Does AIRDUC® TPE 363 (MD) have resistance to oil gasoline and chemicals?
A: NORRES specifies good resistance to oil, gasoline and chemicals, together with good resistance to alkalis and acids. Compatibility with the actual medium, concentration, temperature and operating conditions must be checked before use.
Q: Is the standard AIRDUC® TPE 363 (MD) antistatic?
A: The current official product information identifies the standard hose wall as thermoplastic rubber TPE. NORRES separately mentions antistatic thermoplastic rubber for the US version, but does not state an antistatic resistance value for the standard version listed here.
Q: Can AIRDUC® TPE 363 (MD) be used for pressure and vacuum operation?
A: NORRES provides size-specific recommended threshold values for overpressure and underpressure. The permitted pressure and vacuum values vary by hose size and must be checked against the official technical table before use.
Q: How should the correct hose size be selected?
A: Selection should consider hose inside diameter, conveyed material, operating temperature, airflow, vacuum condition, pressure condition, installation length, required bending radius and quantity requirement. The permitted values vary by hose size and must be checked against the official technical table before use.