HUPLONG INDUSTRIES (M) SDN BHD
No 2-48, Jalan Perniagaan 2, Taman Pusat Perniagaan, Kampung Tengah Sungai Abong, 84000 Muar, Johor, Malaysia.
+606-9522968
24B, Jalan PSK 3,
Pusat Perdagangan Seri
Kembangan, 43300
Seri Kembangan,
Selangor, Malaysia.
+6016-3411889
NORRES TIMBERDUC® PUR 533 AS (MD) 每 Heavy Antistatic Polyurethane Hose for Wood Dust Extraction
| Previous | 13 / 13 | Next |
- antistatic polyurethane hose
- NORRES TIMBERDUC PUR 533 AS MD Malaysia
- Wood Dust Extraction Hose
- Wood Chip Extraction Hose
- Flame Retardant PU Hose
Product details
- extraction unit, dedusting system, filter system, oil mist extraction
- explosion hazard area
- wood dust extraction, wood chips: furniture production, saw mill
- wood dust extraction: vertical panel saw, saw, woodworking machine, edge processing machine, parquet flooring grinding machine
PROPERTIES
- heavy duty
- highly abrasion resistant
- increased pressure and vacuum resistance
- microbe resistant
- good resistance to oil, gasoline and chemicals
- flame-retardant according to: DIN 4102-B1
- permanently antistatic wall: according to ISO 8031 electrical and surface resistance <10⁹ Ω (according to TRGS 727 <2,5*10⁸ Ω*m and NFPA 652 10⁸-10⁹ Ω)
- in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: pneumatic transport of flammable dusts and bulk materials (Zone 20, 21, 22 inside), aspiration of combustible dusts (Zone 22 inside),
- in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: for conveying for flammable liquids (inside zone 0, 1, 2), for conveying for non-flammable liquids, for use in zone 1 and 2 (gases), for use in zone 0 (gases)
- conforms to the safety regulations of the German Wood Trade Association
- according to DIN 26057 Type 2
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
TEMPERATURE RANGE
- -40°C to 90°C
- short time to 125°C
HUPLONG INDUSTRIES (M) SDN BHD is the authorized distributor of NORRES industrial hoses in Malaysia.
HUPLONG INDUSTRIES (M) SDN BHD supplies genuine NORRES TIMBERDUC® PUR 533 AS (MD) hose for industrial wood dust and wood chip extraction. NORRES officially lists this hose for extraction units, dedusting systems, filter systems and oil mist extraction applications in the woodworking industry.
NORRES TIMBERDUC® PUR 533 AS (MD) is an AIRDUC® profile hose with a spring steel wire firmly embedded in the hose wall. The wall is made from permanently antistatic premium polyurethane Pre-PUR® and has an approximate wall thickness of 0.7 mm.
NORRES specifies this model as heavy duty, highly abrasion resistant, with increased pressure and vacuum resistance. It is also microbe resistant, has good resistance to oil, gasoline and chemicals, and is flame-retardant according to DIN 4102-B1. The operating temperature range is from -40°C to +90°C, with short-time temperature resistance up to +125°C.
Official NORRES applications include wood dust and wood chip extraction in furniture production and saw mills, as well as extraction from vertical panel saws, saws, woodworking machines, edge processing machines and parquet flooring grinding machines.
NORRES specifies a permanently antistatic wall according to ISO 8031 with electrical and surface resistance below 109 Ω. NORRES also states that this model is in accordance with ATEX 2014/34/EU and German TRGS 727 for the specific dust, bulk-material, liquid and gas zone scenarios listed in the official product information. The complete system and installation requirements must be assessed before use.
The permitted pressure, vacuum and bending radius values vary by hose size and must be checked against the official technical table before use.
Our team can assist customers throughout Malaysia with NORRES hose selection based on hose diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length and quantity requirement.
FAQ
Q: What is NORRES TIMBERDUC® PUR 533 AS (MD)?
A: NORRES TIMBERDUC® PUR 533 AS (MD) is a heavy-duty permanently antistatic polyurethane hose for industrial wood dust and wood chip extraction.
Q: What is the official construction of TIMBERDUC® PUR 533 AS (MD)?
A: The hose has an AIRDUC® profile design with a spring steel wire firmly embedded in the wall and a permanently antistatic premium polyurethane Pre-PUR® wall with an approximate thickness of 0.7 mm.
Q: Is TIMBERDUC® PUR 533 AS (MD) abrasion resistant?
A: Yes. NORRES officially specifies this model as highly abrasion resistant and suitable for demanding extraction of wood dust and wood chips.
Q: What is the operating temperature range?
A: NORRES specifies an operating temperature range from -40°C to +90°C. The hose can withstand temperatures up to +125°C for short periods.
Q: Is this hose flame-retardant?
A: Yes. NORRES specifies TIMBERDUC® PUR 533 AS (MD) as flame-retardant according to DIN 4102-B1.
Q: Is TIMBERDUC® PUR 533 AS (MD) antistatic?
A: Yes. NORRES specifies a permanently antistatic wall according to ISO 8031 with electrical and surface resistance below 109 Ω.
Q: Can this hose be used in explosion hazard area applications?
A: NORRES states that this model is in accordance with ATEX 2014/34/EU and German TRGS 727 for the specific zone and conveyed-material scenarios listed in its official product information. This statement does not replace assessment of the full installed system and actual operating conditions.
Q: What woodworking applications are officially listed?
A: NORRES lists wood dust and wood chip extraction in furniture production and saw mills, plus extraction from vertical panel saws, saws, woodworking machines, edge processing machines and parquet flooring grinding machines.
Q: How should the correct hose size be selected?
A: Selection should consider hose inside diameter, wood dust or wood chip type, airflow, vacuum condition, operating temperature, installation length, bending radius and quantity requirement. The permitted pressure, vacuum and bending radius values vary by hose size and must be checked against the official technical table before use.