HUPLONG INDUSTRIES (M) SDN BHD
No 2-48, Jalan Perniagaan 2, Taman Pusat Perniagaan, Kampung Tengah Sungai Abong, 84000 Muar, Johor, Malaysia.
+606-9522968
24B, Jalan PSK 3,
Pusat Perdagangan Seri
Kembangan, 43300
Seri Kembangan,
Selangor, Malaysia.
+6016-3411889
NORRES TIMBERDUC® PUR 532 AS (LD) 每 Antistatic Polyurethane Hose for the Woodworking Industry
| Previous | 21 / 22 | Next |
- antistatic polyurethane hose
- Wood Dust Extraction Hose
- Wood Chip Extraction Hose
- Flame Retardant PU Hose
- NORRES TIMBERDUC PUR 532 AS LD Malaysia
Product details
- extraction unit, dedusting system, filter system, oil mist extraction
- explosion hazard area
- wood dust extraction, wood chips: furniture production, saw mill
- wood dust extraction: vertical panel saw, saw, woodworking machine, edge processing machine, parquet flooring grinding machine
PROPERTIES
- medium-heavy duty
- highly flexible + compressible 3:1
- abrasion-resistant
- microbe resistant
- good resistance to oil, gasoline and chemicals
- flame-retardant according to: DIN 4102-B1
- Permanently antistatic wall: according to ISO 8031 electrical and surface resistance <10⁹ Ω (according to NFPA 652 10⁸-10⁹ Ω)
- in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: aspiration of combustible dust (zone 22 inside), for conveying of non-flammable liquids, for use in zone 1 and 2 (gases)
- conforms to the safety regulations of the German Wood Trade Association
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
TEMPERATURE RANGE
- -40°C to 90°C
- short time to 125°C
DESIGN
- patented PROTAPE® tape hose
- 1. spring steel wire integrated in wall
- 2. wall: permanently antistatic premium polyurethane (Pre-PUR®), resistant to aggressive wood types and wood preservatives
- 3. wall thickness 0,6 mm approx.
HUPLONG INDUSTRIES (M) SDN BHD is the authorized distributor of NORRES industrial hoses in Malaysia.
HUPLONG INDUSTRIES (M) SDN BHD supplies genuine NORRES TIMBERDUC® PUR 532 AS (LD) hose for wood dust and wood chip extraction in the woodworking industry. NORRES officially lists this model for extraction units, dedusting systems, filter systems, oil mist extraction, furniture production and saw mills.
NORRES TIMBERDUC® PUR 532 AS (LD) is a medium-heavy PROTAPE® tape hose. Its official construction includes a spring steel wire integrated in the wall and a permanently antistatic premium polyurethane Pre-PUR® wall with an approximate wall thickness of 0.6 mm. NORRES states that the hose wall is resistant to aggressive wood types and wood preservatives.
NORRES specifies this hose as abrasion-resistant, microbe resistant, highly flexible and compressible at a ratio of 3:1. It also has good resistance to oil, gasoline and chemicals, and is flame-retardant according to DIN 4102-B1.
The official operating temperature range is from -40°C to +90°C, with short-time temperature resistance up to +125°C.
Official NORRES applications include wood dust extraction from vertical panel saws, saws, woodworking machines, edge processing machines and parquet flooring grinding machines.
NORRES specifies a permanently antistatic wall according to ISO 8031 with electrical and surface resistance below 109 Ω. NORRES also states that this model is in accordance with ATEX 2014/34/EU and German TRGS 727 for aspiration of combustible dust in Zone 22 inside the hose, conveying of non-flammable liquids, and use in Zone 1 and Zone 2 for gases. The complete system and actual installation conditions must be evaluated before use.
The permitted values vary by hose size and must be checked against the official technical table before use.
Our team can assist customers throughout Malaysia with NORRES hose selection based on hose diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length and quantity requirement.
FAQ
Q: What is NORRES TIMBERDUC® PUR 532 AS (LD)?
A: NORRES TIMBERDUC® PUR 532 AS (LD) is a medium-heavy antistatic polyurethane hose for wood dust and wood chip extraction in the woodworking industry.
Q: What is the official construction of TIMBERDUC® PUR 532 AS (LD)?
A: The hose is a PROTAPE® tape hose with a spring steel wire integrated in the wall and a permanently antistatic premium polyurethane Pre-PUR® wall with an approximate thickness of 0.6 mm.
Q: What woodworking applications are officially listed by NORRES?
A: NORRES lists extraction units, dedusting systems, filter systems, oil mist extraction, furniture production, saw mills, vertical panel saws, saws, woodworking machines, edge processing machines and parquet flooring grinding machines.
Q: Is TIMBERDUC® PUR 532 AS (LD) antistatic?
A: Yes. NORRES specifies a permanently antistatic hose wall according to ISO 8031 with electrical and surface resistance below 109 Ω.
Q: Is TIMBERDUC® PUR 532 AS (LD) flame-retardant?
A: Yes. NORRES specifies this model as flame-retardant according to DIN 4102-B1.
Q: Is this hose abrasion-resistant?
A: Yes. NORRES officially specifies TIMBERDUC® PUR 532 AS (LD) as abrasion-resistant.
Q: What is the operating temperature range?
A: NORRES specifies an operating temperature range from -40°C to +90°C. The hose can withstand temperatures up to +125°C for short periods.
Q: Can TIMBERDUC® PUR 532 AS (LD) be used in explosion hazard area applications?
A: NORRES states that this model is in accordance with ATEX 2014/34/EU and German TRGS 727 for aspiration of combustible dust in Zone 22 inside the hose, conveying of non-flammable liquids, and use in Zone 1 and Zone 2 for gases. The complete system and actual installation conditions must be evaluated before use.
Q: How should the correct hose size be selected?
A: Selection should consider hose inside diameter, wood dust or wood chip type, airflow, pressure condition, vacuum condition, operating temperature, installation length, bending radius and quantity requirement. The permitted values vary by hose size and must be checked against the official technical table before use.