HUPLONG INDUSTRIES (M) SDN BHD
No 2-48, Jalan Perniagaan 2, Taman Pusat Perniagaan, Kampung Tengah Sungai Abong, 84000 Muar, Johor, Malaysia.
+606-9522968
24B, Jalan PSK 3,
Pusat Perdagangan Seri
Kembangan, 43300
Seri Kembangan,
Selangor, Malaysia.
+6016-3411889
NORRES TIMBERDUC® PUR 531 AS (XLD) 每 Antistatic Polyurethane Hose for the Woodworking Industry
| Previous | 20 / 22 | Next |
- Wood Dust Extraction Hose
- NORRES TIMBERDUC PUR 531 AS XLD Malaysia
- Permanently Antistatic Polyurethane Hose
- CNC Machine Dust Extraction Hose
- Flame Retardant Woodworking Hose
Product details
APPLICATION
- extraction unit, dedusting system, filter system, oil mist extraction
- explosion hazard area
- wood dust extraction, wood chips: furniture production, saw mill
- wood dust extraction: CNC machine, CNC machining center (especially for fast moving systems)
- bellows, compensators
PROPERTIES
- light weight
- highly flexible + compressible 3:1
- abrasion-resistant
- microbe resistant
- good resistance to oil, gasoline and chemicals
- flame-retardant according to: DIN 4102-B1
- Permanently antistatic wall: according to ISO 8031 electrical and surface resistance <10⁹ Ω (according to NFPA 652 10⁸-10⁹ Ω)
- in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: aspiration of combustible dust (zone 22 inside), for conveying of non-flammable liquids, for use in zone 1 and 2 (gases)
- conforms to the safety regulations of the German Wood Trade Association
- according to DIN 26057 Type 1
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
TEMPERATURE RANGE
- -40°C to 90°C
- short time to 125°C
DESIGN
- patented PROTAPE® tape hose
- 1. spring steel wire integrated in wall
- 2. wall: permanently antistatic premium polyurethane (Pre-PUR®), resistant to aggressive wood types and wood preservatives
- 3. wall thickness 0,4 mm approx.
DELIVERY VARIANTS
- further diameters and lengths available on request
- transparent + partially silver coloured (standard)
- special colours: partially coloured, completely coloured
- ID 1,5''/ 38mm 12/305mm compressed packed in poly bag (low transportation cost / risk, minimum storage size), ID315 500mm not compressed
HUPLONG INDUSTRIES (M) SDN BHD is the authorized distributor of NORRES industrial hoses in Malaysia.
HUPLONG INDUSTRIES (M) SDN BHD supplies genuine NORRES TIMBERDUC® PUR 531 AS (XLD) antistatic polyurethane hoses for woodworking dust extraction and flexible extraction applications.
NORRES TIMBERDUC® PUR 531 AS (XLD) is an antistatic polyurethane hose for the woodworking industry. NORRES classifies this model as lightweight and flame-resistant. It is designed for extraction units, dedusting systems, filter systems, oil mist extraction, wood dust extraction and wood chip extraction.
The official NORRES design is a PROTAPE® tape hose with a spring steel wire integrated in the wall. The hose wall is permanently antistatic premium polyurethane Pre-PUR® and is specified as resistant to aggressive wood types and wood preservatives. The approximate wall thickness is 0.4 mm.
NORRES lists this model for wood dust extraction and wood chips in furniture production and saw mills. It is also listed for wood dust extraction on CNC machines and CNC machining centers, especially for fast moving systems, as well as for bellows and compensators.
The official NORRES product information states that TIMBERDUC® PUR 531 AS (XLD) is highly flexible and compressible 3:1, abrasion-resistant, microbe resistant and has good resistance to oil, gasoline and chemicals. It is flame-retardant according to DIN 4102-B1.
The permanently antistatic wall is specified according to ISO 8031 with electrical and surface resistance below 10⁹ Ω. NORRES also states a value of 10⁸ to 10⁹ Ω according to NFPA 652.
NORRES states that this model is in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727 for aspiration of combustible dust in Zone 22 inside, conveying of non-flammable liquids and use in Zone 1 and Zone 2 for gases.
The official temperature range is -40°C to 90°C, with short-time operation up to 125°C. NORRES lists transparent with partially silver colour as the standard delivery variant.
Our team can assist customers throughout Malaysia with NORRES hose selection based on hose diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length and quantity requirement.
The permitted pressure, vacuum and bending-radius values vary by hose size and must be checked against the official technical table before use.
FAQ
Q: What is NORRES TIMBERDUC® PUR 531 AS (XLD)?
A: NORRES TIMBERDUC® PUR 531 AS (XLD) is an antistatic polyurethane hose for the woodworking industry. NORRES classifies it as lightweight and flame-resistant.
Q: What woodworking applications are officially listed for this hose?
A: NORRES lists extraction units, dedusting systems, filter systems, wood dust extraction, wood chip extraction, furniture production, saw mills, CNC machines and CNC machining centers.
Q: What is the official hose construction?
A: NORRES specifies a PROTAPE® tape hose with a spring steel wire integrated in the wall. The wall is permanently antistatic premium polyurethane Pre-PUR® with an approximate wall thickness of 0.4 mm.
Q: Is TIMBERDUC® PUR 531 AS (XLD) permanently antistatic?
A: Yes. NORRES specifies a permanently antistatic wall according to ISO 8031 with electrical and surface resistance below 10⁹ Ω. NORRES also states a value of 10⁸ to 10⁹ Ω according to NFPA 652.
Q: Is this hose electrically conductive?
A: NORRES identifies this model as permanently antistatic. It must not be described as an electrically conductive EC hose unless the official product designation includes the EC version.
Q: Is TIMBERDUC® PUR 531 AS (XLD) flame-retardant?
A: Yes. NORRES states that this model is flame-retardant according to DIN 4102-B1.
Q: Is this hose suitable for explosion hazard area applications?
A: NORRES lists explosion hazard area as an application and states that this model is in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727 for the officially specified dust aspiration liquid conveying and gas-zone conditions. The complete installation requirement must be checked before use.
Q: What is the official operating temperature range?
A: NORRES lists an operating temperature range of -40°C to 90°C, with short-time operation up to 125°C.
Q: Is the hose flexible for moving CNC extraction systems?
A: NORRES states that TIMBERDUC® PUR 531 AS (XLD) is highly flexible and compressible 3:1. NORRES also lists CNC machines and CNC machining centers, especially fast moving systems, among the official applications.
Q: Is this hose abrasion-resistant and microbe resistant?
A: Yes. NORRES states that this model is abrasion-resistant and microbe resistant. NORRES also states good resistance to oil, gasoline and chemicals.
Q: How should the correct hose size be selected?
A: Selection should be based on hose diameter, extracted material, airflow, vacuum condition, operating temperature, installation movement, bending radius, installation length and quantity requirement. The permitted pressure, vacuum and bending-radius values vary by hose size and must be checked against the official technical table before use.