HUPLONG INDUSTRIES (M) SDN BHD
No 2-48, Jalan Perniagaan 2, Taman Pusat Perniagaan, Kampung Tengah Sungai Abong, 84000 Muar, Johor, Malaysia.
+606-9522968
24B, Jalan PSK 3,
Pusat Perdagangan Seri
Kembangan, 43300
Seri Kembangan,
Selangor, Malaysia.
+6016-3411889
NORRES AIRDUC® PUR 355 AS (HD) 每 Heavy Antistatic Polyurethane Hose
| Previous | 1 / 4 | Next |
- Flame Retardant PU Hose
- Abrasive Powder Bulk Material Hose
- NORRES AIRDUC PUR 355 AS HD Malaysia
- Heavy Antistatic Polyurethane Hose
- High Vacuum PU Conveying Hose
Product details
- flexible hose/ ducting for high throughput of abrasive powder, bulk material, granulate and for gases
- plastic industry, conveying of granulates and powders: granulate conveying equipment, vacuum hopper/ conveyor, suction conveyor, dosing system, bulk-bag (big bag)-charging and discharging, shredder, mill, extruder, injection moulding machine
- printed circuit board drilling machine (PCB)
- powder spraying, powder coating: e.g. printing industry
- offset printing machine: air supply, air supply cabinet
- industrial vacuum cleaners, vacuum cleaners
- explosion hazard area
- agricultural industry, conveying of seed and fertilizers: seeding machine, seed drill, drilling machine
- agricultural industry: pneumatic grain conveyer
- construction industry, road milling machine
- raw material conveying hose for powders, granulates, sand, quartz, gravel, shards and chips/ shavings
- compressor, side channel blower, vacuum pump, pressure pump, pump
- paper mill, paper and pulp industry, packaging machine: edge strip suctioning system/ edge trim exhaust systems
- surface preparation: shot blasting/ sand blasting recovery e.g. at blasting chamber, ship yard, stripping machine, flooring preparation machine, grinding machine
- municipal vehicle: sweeper, sweeping machine
- municipal vehicle: lawn mower, slope mower, leaf blower/ leaf collector
- vacuum lifting equipment, vacuum handling system
- silos and tankers: silo charging, silo discharging
- silo and tankers: conveying of wood pellets, plastic granulate, plastic powder
PROPERTIES
- heavy duty
- highly abrasion resistant
- increased pressure and vacuum resistance
- microbe resistant
- good resistance to oil, gasoline and chemicals
- very good low temperature flexibility
- flame-retardant according to: UL94-V2 & DIN 4102-B1
- permanently antistatic wall: according to ISO 8031 electrical and surface resistance <10⁹ Ω (according to TRGS 727 <2,5*10⁸ Ω*m and NFPA 652 10⁸-10⁹ Ω)
- in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: pneumatic transport of flammable dusts and bulk materials (Zone 20, 21, 22 inside), aspiration of combustible dusts (Zone 22 inside),
- in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: for conveying for flammable liquids (inside zone 0, 1, 2), for conveying for non-flammable liquids, for use in zone 1 and 2 (gases), for use in zone 0 (gases)
- conforms to the safety regulations of the German Wood Trade Association
- according to DIN 26057 Type 3
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
TEMPERATURE RANGE
- -40°C to 90°C
- short time to 125°C
DESIGN
- AIRDUC® profile hose
- 1. spring steel wire firmly embedded in wall
- 2. wall: permanently antistatic premium ester-polyurethane (Pre-PUR®)
- 3. wall thickness 1,4 - 1,5 mm approx.
DELIVERY VARIANTS
- further diameters and lengths available on request
- transparent (standard)
- special colours: partially coloured, completely coloured
- customer-specific branding
HUPLONG INDUSTRIES (M) SDN BHD is the authorized distributor of NORRES industrial hoses in Malaysia.
HUPLONG INDUSTRIES (M) SDN BHD supplies genuine NORRES AIRDUC® PUR 355 AS (HD) hose for high-throughput conveying and ducting of abrasive powder, bulk material, granulate and gases. NORRES officially lists this heavy antistatic polyurethane hose for conveying systems, industrial vacuum cleaners, pumps, plastic-processing machinery, agricultural conveying equipment, surface-preparation systems, silos and tankers.
NORRES AIRDUC® PUR 355 AS (HD) is a heavy-duty AIRDUC® profile hose. Its official construction includes a spring steel wire firmly embedded in the hose wall and a permanently antistatic premium ester-polyurethane Pre-PUR® wall. The official wall thickness is approximately 1.4 mm to 1.5 mm.
NORRES specifies this model as highly abrasion resistant, microbe resistant and suitable for increased pressure and vacuum resistance. The official product information also states good resistance to oil, gasoline and chemicals, very good low-temperature flexibility, and flame-retardant properties according to UL94-V2 and DIN 4102-B1.
The official operating temperature range is from -40°C to +90°C, with short-time temperature resistance up to +125°C.
NORRES specifies a permanently antistatic wall according to ISO 8031 with electrical and surface resistance below 109 Ω. NORRES also states that this model is in accordance with ATEX 2014/34/EU and German TRGS 727 for the specific flammable-dust, bulk-material, liquid and gas scenarios stated in the official product information. The complete system design, grounding arrangement and actual installation requirements must be checked before use.
The permitted pressure, vacuum and bending radius values vary by hose size and must be checked against the official technical table before use.
Our team can assist customers throughout Malaysia with NORRES hose selection based on hose diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length and quantity requirement.
FAQ
Q: What is NORRES AIRDUC® PUR 355 AS (HD)?
A: NORRES AIRDUC® PUR 355 AS (HD) is a heavy-duty permanently antistatic polyurethane hose for high-throughput conveying and ducting of abrasive powder, bulk material, granulate and gases.
Q: What is the official construction of AIRDUC® PUR 355 AS (HD)?
A: The hose has an AIRDUC® profile construction with a spring steel wire firmly embedded in the wall and a permanently antistatic premium ester-polyurethane Pre-PUR® wall. The official wall thickness is approximately 1.4 mm to 1.5 mm.
Q: Is AIRDUC® PUR 355 AS (HD) antistatic?
A: Yes. NORRES specifies a permanently antistatic hose wall according to ISO 8031 with electrical and surface resistance below 109 Ω.
Q: Is AIRDUC® PUR 355 AS (HD) abrasion resistant?
A: Yes. NORRES officially specifies this model as highly abrasion resistant and microbe resistant.
Q: What materials and applications are officially listed by NORRES?
A: NORRES lists abrasive powder, bulk material, granulate and gases. Official applications include plastic-industry conveying systems, industrial vacuum cleaners, agricultural seed and fertilizer conveying, raw-material conveying, compressors, vacuum pumps, pressure pumps, surface-preparation equipment, municipal sweepers, silos and tankers.
Q: What is the operating temperature range?
A: NORRES specifies an operating temperature range from -40°C to +90°C. The hose can withstand temperatures up to +125°C for short periods.
Q: Is AIRDUC® PUR 355 AS (HD) flame-retardant?
A: Yes. NORRES specifies flame-retardant properties according to UL94-V2 and DIN 4102-B1.
Q: Can this hose be used in explosion hazard area applications?
A: NORRES states that AIRDUC® PUR 355 AS (HD) is in accordance with ATEX 2014/34/EU and German TRGS 727 for the specific flammable-dust, bulk-material, liquid and gas scenarios listed in the official product information. The complete installed system and grounding arrangement must be assessed before use.
Q: How should the correct hose size be selected?
A: Selection should consider hose inside diameter, conveyed material, throughput, operating temperature, airflow, pressure condition, vacuum condition, installation length, bending radius and quantity requirement. The permitted pressure, vacuum and bending radius values vary by hose size and must be checked against the official technical table before use.