HUPLONG INDUSTRIES (M) SDN BHD
No 2-48, Jalan Perniagaan 2, Taman Pusat Perniagaan, Kampung Tengah Sungai Abong, 84000 Muar, Johor, Malaysia.
+606-9522968
24B, Jalan PSK 3,
Pusat Perdagangan Seri
Kembangan, 43300
Seri Kembangan,
Selangor, Malaysia.
+6016-3411889
NORRES AIRDUC® PUR 356 AS (XHD) 每 Antistatic Super-Heavy Polyurethane Hose
| Previous | 2 / 22 | Next |
- Vacuum Truck Suction Hose
- Silo and Tanker Conveying Hose
- NORRES AIRDUC PUR 356 AS XHD Malaysia
- Super Heavy Antistatic Polyurethane Hose
- Extremely Abrasion Resistant Bulk Material Hose
Product details
- flexible hose/ ducting for high throughput of extremely abrasive bulk material, granulate and stone
- plastic industry, conveying of granulates and powders: granulate conveying equipment, vacuum hopper/ conveyor, suction conveyor, dosing system, bulk-bag (big bag)-charging and discharging, shredder, mill, extruder, injection moulding machine
- suction vehicles: roof gravelling, roof gravel conveying
- vacuum truck, suction vehicle, dry suction truck: industrial cleaning, furnace cleaning
- suction excavator
- explosion hazard area
- agricultural industry: pneumatic grain conveyer
- concrete pump: outlet hose, discharge hose
- construction industry: rock drill, rock drilling machine
- raw material conveying hose for powders, granulates, sand, quartz, gravel, shards and chips/ shavings
- compressor, side channel blower, vacuum pump, pressure pump, pump
- paper mill, paper and pulp industry, packaging machine: edge strip suctioning system/ edge trim exhaust systems
- surface preparation: shot blasting/ sand blasting recovery e.g. at blasting chamber, ship yard, stripping machine, flooring preparation machine, grinding machine
- silos and tankers: silo charging, silo discharging
- silo and tankers: conveying of wood pellets, plastic granulate, plastic powder
PROPERTIES
- super-heavy duty
- extremely abrasion-resistant with reinforcement underneath wire and narrow hose pitch
- microbe resistant
- good resistance to oil, gasoline and chemicals
- very good low temperature flexibility
- permanently antistatic wall: according to ISO 8031 electrical and surface resistance <10⁹ Ω (according to TRGS 727 <2,5*10⁸ Ω*m and NFPA 652 10⁸-10⁹ Ω)
- according to DIN 26057 Type 4
- in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: pneumatic transport of flammable dusts and bulk materials (Zone 20, 21, 22 inside), aspiration of combustible dusts (Zone 22 inside),
- in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: for conveying for flammable liquids (inside zone 0, 1, 2), for conveying for non-flammable liquids, for use in zone 1 and 2 (gases), for use in zone 0 (gases)
- REACH according to --> Technology / Technical Information / REACH
- conforms to RoHS guideline
TEMPERATURE RANGE
- -40°C to 90°C
- short time to 125°C
DELIVERY VARIANTS
- further diameters and lengths available on request
- transparent (standard)
- special colours: full coloured
- customer-specific branding
DESIGN
- AIRDUC® profile hose
- 1. spring steel wire firmly embedded in wall
- 2. wall: permanently antistatic premium ester-polyurethane (Pre-PUR®)
- 3. wall thickness 2,0 to 2,5 mm approx.
- 4. reinforcement of the primary abrasion areas
HUPLONG INDUSTRIES (M) SDN BHD is the authorized distributor of NORRES industrial hoses in Malaysia.
HUPLONG INDUSTRIES (M) SDN BHD supplies genuine NORRES AIRDUC® PUR 356 AS (XHD) hose for high-throughput conveying and ducting of extremely abrasive bulk material, granulate and stone. NORRES officially lists this model for vacuum trucks, suction vehicles, dry suction trucks, suction excavators, industrial cleaning, furnace cleaning, raw-material conveying, silos and tankers.
NORRES AIRDUC® PUR 356 AS (XHD) is a super-heavy AIRDUC® profile hose. Its official construction includes a spring steel wire firmly embedded in the wall, a permanently antistatic premium ester-polyurethane Pre-PUR® wall, an approximate wall thickness of 2.0 mm to 2.5 mm and reinforcement of the primary abrasion areas.
NORRES specifies this hose as extremely abrasion-resistant with reinforcement underneath the wire and a narrow hose pitch. It is microbe resistant and has good resistance to oil, gasoline and chemicals, together with very good low-temperature flexibility. NORRES also identifies this model as DIN 26057 Type 4.
The permanently antistatic hose wall is specified according to ISO 8031 with electrical and surface resistance below 109 Ω. NORRES states that this model is in accordance with ATEX 2014/34/EU and German TRGS 727 for the specific dust, bulk-material, liquid and gas-zone scenarios stated in the official product information. The complete system design, grounding arrangement and actual installation requirements must be checked before use.
Official NORRES applications include plastic-industry conveying of granulates and powders, pneumatic grain conveying, concrete-pump outlet and discharge hose applications, rock drilling equipment, edge-strip suction systems, shot-blasting and sand-blasting recovery systems, silo charging, silo discharging and conveying of wood pellets, plastic granulate and plastic powder.
The official operating temperature range is from -40°C to +90°C, with short-time temperature resistance up to +125°C.
The permitted pressure, vacuum and bending radius values vary by hose size and must be checked against the official technical table before use.
Our team can assist customers throughout Malaysia with NORRES hose selection based on hose diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length and quantity requirement.
FAQ
Q: What is NORRES AIRDUC® PUR 356 AS (XHD)?
A: NORRES AIRDUC® PUR 356 AS (XHD) is a super-heavy permanently antistatic polyurethane hose for high-throughput conveying and ducting of extremely abrasive bulk material, granulate and stone.
Q: What is the official construction of AIRDUC® PUR 356 AS (XHD)?
A: The hose has an AIRDUC® profile construction with a spring steel wire firmly embedded in the wall, a permanently antistatic premium ester-polyurethane Pre-PUR® wall, an approximate wall thickness of 2.0 mm to 2.5 mm and reinforcement of the primary abrasion areas.
Q: Is AIRDUC® PUR 356 AS (XHD) antistatic?
A: Yes. NORRES specifies a permanently antistatic wall according to ISO 8031 with electrical and surface resistance below 109 Ω.
Q: Is AIRDUC® PUR 356 AS (XHD) abrasion resistant?
A: Yes. NORRES specifies this model as extremely abrasion-resistant, with reinforcement underneath the wire and a narrow hose pitch.
Q: What materials and applications are officially listed by NORRES?
A: NORRES lists extremely abrasive bulk material, granulate, stone, powders, sand, quartz, gravel, shards and chips or shavings. Official applications include vacuum trucks, suction vehicles, dry suction trucks, suction excavators, industrial cleaning, furnace cleaning, plastic processing, agricultural pneumatic grain conveying, silos and tankers.
Q: What is the operating temperature range?
A: NORRES specifies an operating temperature range from -40°C to +90°C. The hose can withstand temperatures up to +125°C for short periods.
Q: Does AIRDUC® PUR 356 AS (XHD) resist oil gasoline and chemicals?
A: NORRES specifies good resistance to oil, gasoline and chemicals. Compatibility with the actual conveyed material, concentration, temperature and operating conditions must still be checked before use.
Q: Can AIRDUC® PUR 356 AS (XHD) be used in explosion hazard area applications?
A: NORRES states that this model is in accordance with ATEX 2014/34/EU and German TRGS 727 for the specific dust, bulk-material, flammable-liquid, non-flammable-liquid and gas-zone scenarios listed in the official product information. The complete installed system and grounding arrangement must be assessed before use.
Q: How should the correct hose size be selected?
A: Selection should consider hose inside diameter, conveyed material, throughput, operating temperature, airflow, pressure condition, vacuum condition, installation length, bending radius and quantity requirement. The permitted pressure, vacuum and bending radius values vary by hose size and must be checked against the official technical table before use.