HUPLONG INDUSTRIES (M) SDN BHD
No 2-48, Jalan Perniagaan 2, Taman Pusat Perniagaan, Kampung Tengah Sungai Abong, 84000 Muar, Johor, Malaysia.
+606-9522968
24B, Jalan PSK 3,
Pusat Perdagangan Seri
Kembangan, 43300
Seri Kembangan,
Selangor, Malaysia.
+6016-3411889
NORRES AIRDUC® PUR 355 SWEEPER REINFORCED 每 Heavy Reinforced Sweeper Hose with Interior Folds
| Previous | 6 / 22 | Next |
- NORRES AIRDUC PUR 355 SWEEPER REINFORCED Malaysia
- Heavy Reinforced Sweeper Hose
- Municipal Vehicle Sweeper Hose
- Highly Abrasion Resistant Polyurethane Hose
- Microbe Resistant PU Hose
Product details
- municipal vehicle: sweeper, sweeping machine
PROPERTIES
- heavy duty and reinforced
- highly abrasion resistant
- microbe resistant
- very good low temperature flexibility
- REACH according to --> Technology / Technical Information / REACH
- conforms to RoHS guideline
TEMPERATURE RANGE
- -40°C to 90°C
DESIGN
- AIRDUC® profile hose
- 1. spring steel wire firmly embedded in wall
- 2. wall: special premium polyurethane (Pre-PUR®)
- 3. wall thickness 1,5 to 1,8 mm approx.
- 4. reinforcement of the primary abrasion areas
DELIVERY VARIANTS
- further diameters and lengths available on request
- transparent (standard)
- special colours: transparent, partially coloured, completely coloured
- customer-specific branding
HUPLONG INDUSTRIES (M) SDN BHD is the authorized distributor of NORRES industrial hoses in Malaysia.
HUPLONG INDUSTRIES (M) SDN BHD supplies genuine NORRES AIRDUC® PUR 355 SWEEPER REINFORCED hose for municipal vehicle sweeper and sweeping machine applications.
NORRES AIRDUC® PUR 355 SWEEPER REINFORCED is a heavy reinforced sweeper hose with interior folds. Its official AIRDUC® profile construction includes a spring steel wire firmly embedded in the wall, a special premium polyurethane Pre-PUR® wall and reinforcement of the primary abrasion areas.
NORRES specifies this model as highly abrasion resistant and microbe resistant, with very good low-temperature flexibility. The official wall thickness is approximately 1.5 mm to 1.8 mm, and the official operating temperature range is from -40°C to +90°C.
The current official standard variant is ID 200–203 mm. NORRES lists a recommended overpressure value of 0.365 bar, a recommended vacuum value of 0.125 bar and a bending radius of 178 mm for this variant. These are recommended threshold operating values and must be checked against the official technical table before use.
Our team can assist customers throughout Malaysia with NORRES hose selection based on hose diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length and quantity requirement.
FAQ
Q: What is NORRES AIRDUC® PUR 355 SWEEPER REINFORCED?
A: NORRES AIRDUC® PUR 355 SWEEPER REINFORCED is a heavy reinforced sweeper hose with interior folds for municipal vehicle sweeper and sweeping machine applications.
Q: What is the official construction of AIRDUC® PUR 355 SWEEPER REINFORCED?
A: The hose has an AIRDUC® profile construction with a spring steel wire firmly embedded in the wall, a special premium polyurethane Pre-PUR® wall and reinforcement of the primary abrasion areas.
Q: What applications are officially listed by NORRES?
A: NORRES lists municipal vehicles, sweepers and sweeping machines.
Q: Is AIRDUC® PUR 355 SWEEPER REINFORCED abrasion resistant?
A: Yes. NORRES officially specifies this model as highly abrasion resistant.
Q: Is this hose microbe resistant?
A: Yes. NORRES specifies AIRDUC® PUR 355 SWEEPER REINFORCED as microbe resistant.
Q: What is the operating temperature range?
A: NORRES specifies an operating temperature range from -40°C to +90°C.
Q: What is the official wall thickness?
A: NORRES specifies an approximate wall thickness of 1.5 mm to 1.8 mm.
Q: What standard hose size is currently listed?
A: The current official standard variant is ID 200–203 mm, with an outer diameter of 215 mm and a production length of 5 m.
Q: What pressure vacuum and bending radius values are currently listed?
A: For the current ID 200–203 mm standard variant, NORRES lists a recommended overpressure value of 0.365 bar, a recommended vacuum value of 0.125 bar and a bending radius of 178 mm. These values are recommended threshold operating values and must be checked before use.