HUPLONG INDUSTRIES (M) SDN BHD
No 2-48, Jalan Perniagaan 2, Taman Pusat Perniagaan, Kampung Tengah Sungai Abong, 84000 Muar, Johor, Malaysia.
+606-9522968
24B, Jalan PSK 3,
Pusat Perdagangan Seri
Kembangan, 43300
Seri Kembangan,
Selangor, Malaysia.
+6016-3411889
CNC Six-Sided Drilling Machine (T-E12 Series)
| Previous | 1 / 5 | Next |
6-Sided Drilling Machine
- CNC Six-Sided Drilling Machine
- Six-Sided Drilling Machine
- CNC Woodworking Machine
- panel furniture drilling machine
- automatic drilling machine
CNC SIX SIDED DRILLING MACHINE DUAL BORING HEAD
Features
-
Drilling on six sides of the workpiece in a single cycle, with grooving available on the front and back sides.
-
The machine supports a minimum board size of 35 × 70 mm and allows complete processing in one operation.
-
The feeding and discharging tables are equipped with air flotation holes to reduce friction and protect the workpiece during movement.
-
The Y-axis is equipped with linear guide rails to ensure high processing accuracy and efficiency.
-
Double grippers combined with an automatic side alignment device ensure stable positioning of the panel during processing.
-
Open docking interface compatible with XML, BAN, MPR and other file formats, allowing seamless connection with design and disassembly software. Barcode scanning is supported, and no manual programming is required.
.jpg)
- Imported gantry milling processing on the overall frame effectively guarantees the stability and accuracy of the frame structure.
- The frame is annealed to eliminate stress and increase the stability of the frame
-
Gripper System Features
-
Equipped with a three-speed intelligent lifting gripper with patented design.
-
During feeding, the gripper is positioned 0.2–0.3 mm lower than the table surface, allowing smooth loading of panels.
-
During idle movement, the gripper is positioned 0.1 mm higher than the table surface to avoid scratches on the board.
-
Ensures high accuracy for horizontal hole drilling on small panels by keeping the gripper flat on the table during processing.
-
Accurate hole positioning with integrated dust removal function. Adaptive gripper switching reduces the total number of grippers required.
-
.jpg)
-
Drilling Unit Configuration
-
Exclusive customized row drilling package.
-
Integrated drill pack with built-in auxiliary pressure roller to improve drilling stability.
-
-
Control System
-
Customized 3D home control system.
-
Dynamic acceleration algorithm to improve processing efficiency.
-
Adaptive speed algorithm for slotting operations.
-
Dynamic positioning algorithm for special-shaped panels.
-
Minimum tool lift path algorithm to reduce idle movement time.
-
Tool slot offset can be adjusted freely according to processing requirements.
-
| Six Sided Drilling Machine Configuration Table | |||||
| NO | Matter | Details | Illustrate | Remark | |
| 1 | Basic information | Basic information | Device model |
T-E12 Dual Boring Head |
|
| 2 | Processing range | Processing plate size range: | Length range | 70MM-2750MM | |
| Width range | 35MM-1200MM | ||||
| Thickness range | 12-50MM | ||||
|
Processing type |
Processing hole type: see process details | Cutter | |||
| Door reaming processing method (whether independent drilling group) | Upper drilling package | Integrated in the upper drill package | |||
| Special-shaped plate (whether it can be processed) | Can be processed | ||||
| Six-sided drill gripper (fixed or not) | Smart three-level function | Exclusive patent | |||
| 3 | Device Configuration | Drill package parameters | Drill package quantity |
Upper drilling package X1 Lower drilling package X1 |
|
| Quantity of drill bits for upper left drilling package | 12 vertical drills, 6 horizontal drills, 12 auxiliary cylinders | ||||
| Quantity of drill bits on the lower drilling package | 6 vertical drills, 2 auxiliary cylinders | ||||
| Auxiliary pressure plate quantity of drill package | 12 built-in drill packages are integrated as a whole | ||||
| Quantity of upper spindles | 3.5KW spindle X1 sets | ||||
| Quantity of lower spindles | 3.5KW spindle X1 sets | ||||
| Basic parameters | Program docking (file format) | MPR/XML/DXF/BAN | |||
| Usage mode (automatic connection usage) | Can be used alone or online | ||||
| Scan Mode (Scan Method) | QR code scanning | ||||
| Total equipment power | About 23KW | ||||
| Working pressure | 0.8Mpa/m2 | ||||
| Equipment net weight | About 3700KG | ||||
| Travel of each axis & maximum positioning speed & power | X axis | 130M/min/750W | |||
| Y axis | 80M/min/1.5KW | ||||
| Z axis | 50M/min/1.5KW | ||||
| U axis | 130M/min/750W | ||||
| V axis | 80M/min/750W | ||||
| W axis | 50M/min/750W | ||||
| A axis | 80M/min/750W | ||||
| Z2 axis | 50M/min/1.5KW | ||||
| Y2 axis | 80M/min/1.5KW | ||||
| Equipment size | Long | 5436MM | |||
| Width | 2880MM | ||||
| High | 2300MM | ||||
Main equipment and its advantages
The main production equipment
| Device name | Equipment brand | Quantity | |
| The main production equipment | High-precision automatic pentahedron gantry machining center | Imported from Taiwan AWEA | 5 |
| High Precision Vertical CNC Machining Center | CARLOS | 6 | |
| Welding Robot | JAPAN OTC | 8 | |
| Laser Fiber Metal Cutting Machine | BAI SHENG | 2 | |
| Laser Interferometer | U.K. RENISHAW | 2 | |
| Ballbar | U.K. RENISHAW | 2 | |
| Vibration Aging Meter | SHENHUA | 2 | |
| Bending machine | 4 | ||
| Sawing machines, milling machines, punching machines, etc. |
|
2、Equipment advantage
|
CNC products are processed through cutting, welding, machining, painting and other processes of raw materials such as steel, square tubes, and aluminum, and then assembled with other finished assemblies to produce CNC six-sided drills, which belong to other engineering machinery manufacturing industries. General equipment manufacturing industry.
From the purchase of raw materials into storage, the square tubes of raw materials are cold drawn through high-precision welding robots/water platform to weld the frame frame, the aging vibrometer is used to eliminate stress, and the frame is put into the five-axis machining center for drilling and tapping processing, using Vertical milling machine horizontal platform, beam, corbel and other precision machining parts, and then into the painting, assembly, testing, inspection packaging, storage.