HUPLONG INDUSTRIES (M) SDN BHD
No 2-48, Jalan Perniagaan 2, Taman Pusat Perniagaan, Kampung Tengah Sungai Abong, 84000 Muar, Johor, Malaysia.
+606-9522968
24B, Jalan PSK 3,
Pusat Perdagangan Seri
Kembangan, 43300
Seri Kembangan,
Selangor, Malaysia.
+6016-3411889
CNC Panel Saw (HP330)
| Previous | 4 / 8 | Next |
- cnc panel saw
- Panel Cutting Machine
- automatic panel saw
- woodworking panel saw
- furniture cutting machine
Features
.jpg)
Loading System
4pcs Air floating loading table;
Avoiding board scratching and assuring smoother board movement, suit for heavy and big type wood panel.
Max. cutting size: 3800mm.
.jpg)
Main Steel Frame
After the welding of the frame is completed, it is placed for one month, and then heat treated;
Eliminate the residual stress generated during the machining process;
Change the crystal structure inside the material;
Enhance the stability of the subject;
Afterwards, it will be treated for 6 months;
Then send to the machining center for precision machining.
.jpg)
Industrial PC Control System
.jpg)
Pneumatic Clamping
The industry-leading two-finger clamping structure is adopted, panel is clamped by air cylinder, before feeding, passing the roller conveyor to ensure the cutting accuracy without damaging panel surface.
12 pcs clamps.
.jpg)
Saw Carriage Drive Servo Motor
Equipped with 2kw servo motor, saw carrigae power reducer, gear reducer three-phase asynchronous motor, make sure high efficiency and stable cutting.
Saw Carrige
Main saw and scoring saw are lifted and lowered independently, sawing stroke can be automatically positioned according to different cutting thickness and width. standard 18.5kw main saw motor is equipped, saw blades fastly replace, which effectively reduces the burden on workers.
Roller Conveyor
Rollers assist the panel moving, protect surface of the panel and prevent scratching, heavy panel is easy to move too.
Saw Carriage Lifting Mechanism
18.5kw motor, main saw shaft rotation speed is 4000rpm, precision reducer can automatically adjust the cutting height according to the panel thickness, high speed, stable, and flexible.
.jpg)
Cutting Bench
1.with air Floating bead, easy to move the board and Avoid scratching on board;
2.The design of the sawing table is upgraded, which is narrower than the traditional bench;
The advantage is that it is not easy to sink or deform.
And cutting panel edge is not easy to burst.
.jpg)
Optional Side aligner device
Fix cutting panel width side, control panels not move or shake when sawing, ensure width sawing precision.
Pressure can be adjusted according to difference thickness, weight and material, ensure the precision of sawing dimension.
Optional Cutting optimization software
Automatic calculate system,
Cutting plan layout system,
Remains management system;
Greatly enhance user productivity, reduce production costs, increase revenue, and improve the panels utilization rate.
Technical Specifications
Applications
Service Coverage
Loading System
4pcs Air floating loading table;
Avoiding board scratching and assuring smoother board movement, suit for heavy and big type wood panel.
Max. cutting size: 3800mm.
Main Steel Frame
After the welding of the frame is completed, it is placed for one month, and then heat treated;
Eliminate the residual stress generated during the machining process;
Change the crystal structure inside the material;
Enhance the stability of the subject;
Afterwards, it will be treated for 6 months;
Then send to the machining center for precision machining.
Industrial PC Control System
-
Easy to operation, safety & reliable;
2) Which has complete operating hints and troubleshooting guide functions;
3) It’s cutting plan can edit manually; can simulate or execute cutting plans;
4) Can compatible with bar code manage software or factory automation software.
Pneumatic Clamping
The industry-leading two-finger clamping structure is adopted, panel is clamped by air cylinder, before feeding, passing the roller conveyor to ensure the cutting accuracy without damaging panel surface.
12 pcs clamps.
Saw Carriage Drive Servo Motor
Equipped with 2kw servo motor, saw carrigae power reducer, gear reducer three-phase asynchronous motor, make sure high efficiency and stable cutting.
Saw Carrige
Main saw and scoring saw are lifted and lowered independently, sawing stroke can be automatically positioned according to different cutting thickness and width. standard 18.5kw main saw motor is equipped, saw blades fastly replace, which effectively reduces the burden on workers.
Roller Conveyor
Rollers assist the panel moving, protect surface of the panel and prevent scratching, heavy panel is easy to move too.
Saw Carriage Lifting Mechanism
18.5kw motor, main saw shaft rotation speed is 4000rpm, precision reducer can automatically adjust the cutting height according to the panel thickness, high speed, stable, and flexible.
Cutting Bench
1.with air Floating bead, easy to move the board and Avoid scratching on board;
2.The design of the sawing table is upgraded, which is narrower than the traditional bench;
The advantage is that it is not easy to sink or deform.
And cutting panel edge is not easy to burst.
Optional Side aligner device
Fix cutting panel width side, control panels not move or shake when sawing, ensure width sawing precision.
Pressure can be adjusted according to difference thickness, weight and material, ensure the precision of sawing dimension.
Optional Cutting optimization software
Automatic calculate system,
Cutting plan layout system,
Remains management system;
Greatly enhance user productivity, reduce production costs, increase revenue, and improve the panels utilization rate.
Technical Specifications
| Max. cutting length | 3800mm |
| Max. cutting thickness | 120mm |
| Main saw blade | Φ380mm(option450mm) |
| Main saw shaft diameter | Φ75mm |
| Main saw shaft rotation speed | 4000rpm |
| Scoring saw blade diameter | Φ200mm |
| Scoring saw shaft diameter | Φ50 |
| Scoring saw shaft rotation speed | 5200rpm |
| Saw carriage forward speed | 0-100m/min |
| Saw carriage backward speed | 0-120m/min |
| Main saw motor power | 18.5kw |
| scoring saw motor power | 2.2kw |
| Saw carrier driving motor power | 2kw ( AC Sevro ) |
| Automatic feeding motor | 2kw ( AC Sevro ) |
| High-pressure blower motor | 3kw+2.2kw |
| Side aligner motor | 0.25kw |
| Total power | 30.15kw |
| Automatic Feeding speed | 85m/min |
| Air pressure | 5-7kg/cm² |
| Worktable height | 980mm |
| Net weight | 6300kg |
| Machine size | 7060*6040*2060mm |
| Air floating table quantity | 4 |
Applications
- Panel sizing and cutting for furniture production
- Cabinet and wardrobe manufacturing
- Precision cutting of wood-based panels
- Panel cutting processes for modular furniture
Service Coverage
We focus on supplying woodworking machinery to local customers.
Installation, machine setup, operator training, and after-sales technical support are provided by our local service team.
Remote technical assistance is available when required.
FAQ
Q: What is this machine used for?
A: It is used for cutting and sizing wood-based panels in furniture manufacturing.
Q: Is this machine suitable for furniture factories?
A: Yes. It is suitable for cabinet, wardrobe, and panel furniture production.
Q: Do you provide installation and training?
A: Yes. Installation, machine setup, and operator training are provided by our local technical team.
Q: Do you offer after-sales technical support?
A: Yes. Ongoing after-sales service and technical support are provided.