• hose/ ducting for high throughput of extremely abrasive bulk material, granulate and stone
• food industry, pharmaceutical industry: foodstuff, pharmaceutical
• conveying of dry foods e.g. rice, cereals, sugar, milk powder, powders, coffee, tea, grains, flour, frozen foods
• vacuum conveying equipment, vacuum hopper, suction conveyor, dosing system
• pelleting machines/ tablet presses
• explosion hazard area
• animal stall, animal shed: feedstuff conveying, feedstuff plant, animal feed transport
• silos and tankers: silo charging, silo discharging
• silos and tankers: conveying of e.g. rice, dry food, cereals, sugar, milk powder, powders, coffee, tea, grains, flour, frozen foods

• super-heavy duty
• Approved by an independent testing laboratory for the complete hose acc. to EU-Directive 10/2011, EC 1935/2004 and EU 2015/174, food grade polyurethane, complies with FDA 21 CFR 177.1210 and FDA 21 CFR 175.300
• very high pressure, vacuum and compression resistance
• Approval acc. to EU-Directive 10/2011 (food simulant E) and EC 1935/2004
• odourless and tasteless
• microbe and hydrolysis resistant
• good resistance to oil, gasoline and chemicals
• very good low temperature flexibility
• Permanently antistatic wall: according to ISO 8031 electrical and surface resistance <10⁹ Ω (according to TRGS 727 <2,5*10⁸ Ω*m and NFPA 652 10⁸-10⁹ Ω)
• in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: pneumatic transport of flammable dusts and bulk materials (Zone 20, 21, 22 inside), aspiration of combustible dusts (Zone 22 inside),
• in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: for conveying for flammable liquids (inside zone 0, 1, 2), for conveying for non-flammable liquids, for use in zone 1 and 2 (gases), for use in zone 0 (gases)
• manufacturing process acc. GMP EC 2023/2006
• conforms to RoHS guideline
• REACH according to --> Technology / Technical Information / REACH

• -40°C to 90°C

• BARDUC^® design
• 1. spring steel wire spiral embedded in wall; spiral: stainless steel wire (INOX)
• 2. smooth interior and exterior; wall: permanently antistatic premium ether-polyurethane (Pre-PUR^®)
• 3. wall thickness 4 to 6 mm approx., depending on diameter

• further diameters and lengths available on request
• transparent (standard)
• customer-specific branding

HUPLONG INDUSTRIES (M) SDN BHD is the authorized distributor of NORRES industrial hoses in Malaysia.

HUPLONG INDUSTRIES (M) SDN BHD supplies genuine NORRES BARDUC® PUR-INOX 382 FOOD-AS (XHD) hoses for industrial customers in Malaysia requiring an antistatic, super-heavy hose for food, pharmaceutical, bulk-material and vacuum conveying applications.

BARDUC® PUR-INOX 382 FOOD-AS (XHD) is designed with a spring-steel wire spiral embedded in the hose wall, using a stainless steel (INOX) spiral. The hose has smooth interior and exterior surfaces, with a permanently antistatic premium ether-polyurethane Pre-PUR® wall. NORRES specifies an approximate wall thickness of 4 to 6 mm, depending on hose diameter.

NORRES officially lists this model for high-throughput conveying of extremely abrasive bulk material, granulate and stone. Listed applications include dry-food conveying, vacuum conveying equipment, vacuum hoppers, suction conveyors, dosing systems, pelleting machines, tablet presses, animal-feed conveying, silo charging and silo discharging.

The official NORRES information identifies this model as super-heavy duty, with very high pressure, vacuum and compression resistance. It is also listed as microbe and hydrolysis resistant, odourless and tasteless, and with good resistance to oil, gasoline and chemicals.

Our team can assist customers throughout Malaysia with NORRES hose selection based on hose diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length and quantity requirement. The permitted pressure, vacuum and bending-radius values vary by hose size and must be checked against the official technical table before use.

FAQ

Q: What is BARDUC® PUR-INOX 382 FOOD-AS (XHD)?
A: It is a NORRES antistatic food hose and pharmaceutical hose with a super-heavy duty construction. NORRES specifies smooth interior and exterior surfaces together with a stainless steel wire spiral embedded in the hose wall.

Q: What materials and products can this hose convey?
A: NORRES lists this model for extremely abrasive bulk material, granulate and stone, as well as dry foods such as rice, cereals, sugar, milk powder, powders, coffee, tea, grains, flour and frozen foods. It is also listed for foodstuff and pharmaceutical applications.

Q: Is this hose suitable for food and pharmaceutical applications?
A: Yes. NORRES states that the complete hose has been approved by an independent testing laboratory in accordance with EU Directive 10/2011, EC 1935/2004 and EU 2015/174. The official information also states compliance with FDA 21 CFR 177.1210 and FDA 21 CFR 175.300.

Q: Is BARDUC® PUR-INOX 382 FOOD-AS (XHD) antistatic?
A: Yes. NORRES specifies a permanently antistatic hose wall in accordance with ISO 8031, with electrical and surface resistance below 10⁹ Ω. The official information also refers to TRGS 727 and NFPA 652 resistance values.

Q: Can this hose be used in explosion-hazard areas?
A: NORRES officially lists this model for explosion-hazard-area applications. The stated uses include pneumatic transport of flammable dusts and bulk materials within Zones 20, 21 and 22, aspiration of combustible dusts within Zone 22, and designated conveying applications for flammable and non-flammable liquids and gases in accordance with ATEX 2014/34/EU and German TRGS 727. The complete system and installation conditions must still be assessed before use.

Q: Is this a heavy-duty hose?
A: NORRES classifies BARDUC® PUR-INOX 382 FOOD-AS (XHD) as super-heavy duty. The official information also states very high pressure, vacuum and compression resistance.

Q: What is the operating temperature range?
A: The official NORRES operating temperature range is -40°C to 90°C.

Q: What hose sizes are available, and how should the correct size be selected?
A: NORRES lists standard inner diameters from 32 mm to 102 mm for this model. The correct hose size should be selected according to conveyed material, required flow rate, operating pressure, vacuum level, bending radius, temperature, installation layout and required hose length.